25 Dec 2007

Heljan Falcon DCC


This was a relatively easy one to fit, no screws to remove the body, just used four thin plastic strips to slip between the body and the chassis and it came off fairly easily.

One of the nice LENZ Direct (8 pin) decoders fits directly in and pop the top back on.

Unfortunately the couplings are going to be harder as there is much internet fuss about the fact that the skirt below the buffer beam has been glued on and will foul *any* couplers that are fitted...I think I'll wait and see what
happens...

some placeholder words for the tool tip
click here to return to the blog